Help & Support

Download Center

Welcome to our Download Center. Here you will find technical and marketing information and tools for your use.

Download Page

Product Warranty


Frequently Asked Questions

Press and hold the 0 key and enter a user code, press 6 (“Phone Numbers”), set up to 4 telephone numbers, and press ENTER.

If the fault occurs after a prolonged power outage, wait a few hours after power returns for the battery to recharge. If the fault message is still displayed, the battery may have reached its end of life cycle, and should be replaced with a new one.
Attention! The alarm system does not work without a backup battery if a power outage occurs. Call service.

Press and hold the 0 key and enter a user code, press 0 (“Auto Arming”), set a daily arming time, and press ENTER.

The “Home” arming modes are to be used during the night and are set by a service technician. If the technician already set them, you can arm to Home 1 or Home 2 modes.

Press and hold the 0 key and enter a user code, press 8, set time and date, and press ENTER.

See All FAQs

Remote controlling the AlarmView+ is simple thanks to the PIMAlink 2.0 app.
PIMALink 2.0 app is available for free on Google Play and Apple Store.

Yes, there are two options:

  1. Using a keyfob
  2. Using PIMAlink 2.0 app

On the upper right corner of the LCD display there is a signal bar. Verify that there are more than 3 bars.

There are three options:

  • Full away – the entire system
  • Home 1 – partial arming for a pre-selected zone
  • Partial – partial arming for an alternative pre-selected zone
See All FAQs